|
|
Contact us |
![]() |
|
Business
Observe showrooms, warehouse, offices, doors, etc without the need to install
expensive and inflexible wiring.
Receive images to multiple remote Monitors for general surveillance and
observation.
Use in multiple Advertising Displays to display message from a Video Player, PC,
etc.
Entertainment
View & Listen all over the house and even out on the patio or pool area from
a central source.
Safety
See who is outside your door using a Video Camera and Transmitter.
Monitor your baby, your children, the swimming pool, the elderly, ill or
recuperating using your Camcorder or a CCTV Video Camera & Transmitter.
Observe your home or office using up to four transmitters and cameras (in
Australia maximum is two transmitters).
Features:
Display: Colour 7 Inch, 16:9 Wide Screen format.
TV System: CCIR / PAL (Australia/UK).
Four Channel Receiver, single channel selection or Automatic Sequential
Switching.

Audio & Video Input/Output for: DVD
Player, Satellite TV, Reversing Video Camera, Tuner, Camcorder, Surveillance
Video Camera, PC DVD / MPEG / AVI Playback, TV Set (AV), Switcher, Video
Monitor, PC Audio/Video Capture Card, VCR, DVR, etc.
Receiver Specifications:
ISM Band: 2.4 ~ 2.483 GHz, 4 channels.
Antenna: Whip, non removable folding type.
Demodulation Method: FM.
Oscillator: P.L.L. (Phase Locked Loop).
Display Specifications:
Colour ~ 7 inch (~ 178 mm) diagonal Thin Film Transistor (TFT) Liquid Crystal
Display (LCD).
Viewable Area: ~ 152 mm x ~ 84 mm.
Normal and Inverted display modes.
Inputs:
Composite Video standard 75 ohm and Line Level Audio, via 3.5 mm 3 contact phono
socket on Right side, compatible with CCIR / PAL (Australia/UK) TV System.
Outputs:
Composite Video standard 75 ohm and Line Level Audio, via 3.5 mm 3 contact phono
socket on Right side.
Speakers, 2 mini forward facing internal.
Earphone, 3.5 mm phono socket.
Controls:
Rotary type:
Brightness.
Colour.
Press Button:
Display Mode.
Power On/Off.
AV-RF Input selector.
Volume Up/Down/Mute.
Invert, 4:3, 16:9.
Channel Select 1/2/3/4/Auto Sequential Switching.
Indicators:
Charging.
Battery Low.
Channel 1,2,3,4,Sequential.
Power On.
AV Input.
Power Requirements:
Snap-On Battery (Li-iON, 5400 mAh, 7.2 V, 3 + hours) or external Power Source.
External Input: 12 ~ 13.5 Volts DC via 2.1 x 5.5 mm, Center Pin = (+).
Current:
~ 880 mA when ON with charged Battery.
~ 80 mA when OFF.
~ 1000 mA when OFF with discharged
Battery.
THIS DEVICE MUST NOT BE
OPERATED FROM AN EXTERNAL POWER SOURCE WHEN BATTERY IS DISCHARGED.
12 Volt DC Regulated 1.5 Amp REG12/1.5A
Plug Pack and Rechargeable Battery Pack included.
Dimensions:
~ 210 x ~ 155 x ~ 62 mm, with Battery and closed.
~ 1300 grams (Battery ~ 500).
Manufacturer's Experience:
10 + Years ISO 9001 Certified, made in Taiwan.
Compatibility:
Receives transmissions from:
TX-MOD 2, TX-MOD 3, TX-ELECTRET, TX-BNC, TX-AV050, TX-AV500, TX-AV1000,
TX-AV2000, TX-CAM2, TX-CAM2P & TX-CAM3.
Receives transmissions of Video
& Left Audio Channel from TX-Box, TX-Mini & TX/RX AV System II.

![]()
IMPORTANT !!! While 'Under
Construction' this page may contain incomplete and/or incorrect information.
Use your Browser "Back
Button" to return to previous page