|
Extraordinarily High
MegaPixel
Resolution Images !
pictured with
optional Lens |
1280 x 960
⅓" SONY
Progressive
Scan 1 228 800 Pixel CCD
for: extraordinarily
Crisp, Detailed & Low Noise Images and
significantly Higher Sensitivity (low light &
Infrared) than ordinary CMOS Image Sensor
J
Wireless WEP 64 / 128-bit, WPA, PSK IEEE 802.11b/g
J
Optional 5 ~ 18 dB Gain Antennas for increased Range
J
Two Alarm Inputs Two Alarm Outputs
J
Two-Way Audio ideal for entry communication and access
control (using Alarm Output)
J
SD Memory Card slot for Back-Up Recording if Network
Fails
J
SMA female RF Antenna
output (2.4 GHz) for easy connection of Coax Cables &
High Gain Antennas to increase range
J
This Camera utilises an
Automatic mechanically movable Infrared Cut Filter for
Vivid Colour Rendition & maximum low light & Infrared
Sensitivity solving the shortcomings associated with
ordinary Day / Night Colour Cameras
J
Built-In Power over
Ethernet (wired connection)
J
free:
SDK &
API for System Integrators & Software Developers
|
|
EXTRA-HIGH
MEGAPIXEL RESOLUTION
Wireless
Network Megapixel CCTV Camera
1280 H-Pixel Colour Day / Night Infrared Sensitive with
Motorised movable IR Cut Filter.
Wireless WEP 64 / 128-bit, WPA, PSK IEEE 802.11b/g .
Easily
relocatable Wireless Network Megapixel CCTV Security
Camera just connect to Power.
Wide range of lenses available 2.8 mm to 55 +
mm. Use 55 mm Lens for full
screen 'Head & Shoulders' or 'Cash Drawer' shots at 10 +
metres.
Suitable for Extra High
Resolution images and high to low illumination levels in
Homes, Shops, Showrooms, Offices, Warehouses, Outdoors, etc.
MPEG4 /
MJPEG 640 x 480 Real-Time 25 ips Live Monitoring.
MPEG4 15
ips / JPEG 12.5 ips 1280 x 960 Live Monitoring
IE Browser
Remote View.
Two-Way
Audio for direct communication / intercom.
Dual
streaming MPEG-4 / JPEG codec with adjustable
quality/compression to cater for fast/slow &
narrow/wide Bandwidth Networks.
Video
Motion Detection 3 Zones & 10 Sensitivity Levels.
Centa-View
Remote monitoring and recording software.
Optional
Maxi-Watch Megapixel multiple-brand (Axis™,
ACTi™,
Panasonic™,
Sony™,
D-link™,
Lumenera™,
Mobotix™,
PIXORD™,
Vivotek™,
JVC™)
software available.
Central Monitoring System & SDK for
integration available.
HTTP, TCP/
IP, UDP, SMTP, FTP, PPPoE, DHCP, DDNS, NTP, 3GPP, UPnP.
FTP -
e-mail - Dynamic Domain Name Server (DDNS) capabilities.
SD Flash
Memory Card Slot for backup protects against network
failure.
Order Code: [IPw-CSdnProg]
$919
$735 < 5 + >
ISO9001
Taiwan Quality
OPTIONS
[REG12/1A]
Plug Pack Regulated 12 VDC 1 Amp
$20
[Cable-LANxo] Crossover LAN Cable
$10 (simplify initial setup)
[SD-2GB] 2 GigaByte SD Memory Card
$25
[Rect-Reg+]
Rectifier Regulator for long cable run, 24 vac power,
etc
Use existing Composite Video
Coaxial Cable for Network low cost easy speedy analog-cctv
to Network-CCTV conversion
more...
|
|
to view pages from IP Network Megapixel CCTV Security Camera
'User's Manual'
to view pages from free
Centa-View Remote Monitoring Recording Software 'User's
Manual'
| All
values are approximate. |
@ 3 metres |
@ 5 metres |
@ 9 metres |
@ 15 metres |
| Width of
Vision with 2.8 mm / 3 mm Lens |
4.9 metres |
8.2 metres |
14.8 metres |
24.8 metres |
| Width of
Vision with 8 mm Lens |
1.8 metres |
3 metres |
5.4 metres |
9 metres |
| Width of
Vision with 12 mm Lens |
1.2 metres |
2 metres |
3.6 metres |
6 metres |
| Width of
Vision with 50 mm Lens |
0.29 metres |
0.48 metres |
0.86 metres |
1.4 metres |
| Additional
Lens selection info
here |
|
|
|
|
|
|
Camera/ SD / Mechanical
Image
Device: 1280 (H) x 960 (V)
1 228 800 Pixel
1/3" Sony Progressive Scan CCD image Sensor.
Lens: C or CS
Mount, Lens is NOT SUPPLIED with this Camera,
compatible lenses are: C Mount
(with
C-Spacer), CS Mount, Fixed, Manual Iris & Auto Iris 1/3" &
1/2" types on
this page,
EXCEPT Cat
Codes: CC21, CC25, CC21IRC, CC40, CS25MI & CS25AIDC,
additional information
here.
Horizontal Resolution
(Pixels): ~ 1280, this value is provided for comparative
purposes only.
Minimum Illumination: ~ 0.6
lux @ F1.0 without IR CUT filter, 3200º Kelvin with AGC = On,
this value is provided for comparative purposes only.
Movable Infrared Optical
Filter:
Colour
sub-carrier is turned off (Colour-Killer) to improve Signal to
Noise Ratio when IR-CUT filter is out of
optical path .
In Day mode (well lit, colour)
mechanism automatically positions IR-CUT
optical filter between Lens and Image Sensor to exclude
Infrared radiation that would otherwise adversely affect
colour reproduction, this ensures colour
rendition not possible with ordinary non-filtered or
notch-filter type Day/Night cameras.
In Night mode (low light,
monochrome)
Colour-Killer is activated and mechanism
automatically removes IR-CUT optical filter to allow
Infrared radiation to pass boosting low light and Infrared
sensitivity, the result is significantly better night images.
Switch-Over/Colour-Killer
points are: Colour to Monochrome
~ 3 Lux, Monochrome
to Colour ~ 7 Lux.
Automatic Electronic Shutter
(AES):
User configurable
On =
1/50 to 1/10 000 second, 20 to 0.1 milliseconds, Off =
20
milliseconds for use with an Automatic Iris Lens, low 20 ms
shutter speed reduces/eliminates smear associated with High
Shutter Speeds that are necessary to control exposure with a
Fixed Iris Lens,
additional
CCTV Automatic Electronic Shutter information.
Spectral Response:
~ 400 to ~ 1100 nm with Infrared 'CUT' Filter 'out' of optical
path, additional
CCTV Infrared Night Vision information.
Automatic Iris (AI) Lens
Output: DC Drive, common 4 pin socket, rotary Potentiometer
level control.
Automatic Gain Control (AGC):
User configurable.
Back-Light Compensation (BLC):
User configurable.
Automatic White Balance (AWB): User
configurable.
Made in Taiwan in an ISO
9001 certified factory.
Manufacturer's Experience:
20 + Years.
SD card management
Recording Trigger: Motion Detection, IP check,
Network break down.
Video Playback: Yes.
Card Slot: Rear of Camera.
Compatibility: 128 MB to 4 GB SanDisk or Transcend.
INPUT / OUTPUT
Video Output: 1.14 V p-p
Composite Video 29 MHz Bandwidth
75 ohms, BNC socket, used for Lens setup &/or independent
monitoring using Wide-Bandwidth
Video Monitor.
Audio Output: Line Level output
for Amplified Speaker, 3.5 mm Phono Socket.
Alarm: 2 x Inputs, 2 x Outputs,
8 pin Mini-Din socket.
NETWORK: Standard RJ45 8p8c
socket.
Radio Frequency: Standard SMA
socket, external thread, socket contact.
Power: 12 Volts DC Regulated ~
500 mA (~ 600 mA Peak, 2.1 x 5.5 mm DC socket, center pin = (+).
Also has Built-In Power over Ethernet.
Dimensions: ~ 80 mm Wide, ~ 70
mm High, ~ 145 mm Deep, excludes I/O sockets/connectors, ~ 480
grams.
|
Network / Software /
Wireless
Protocols: HTTP, RTSP, ARP, ICMP, TCP/ IP, UDP, SMTP, FTP,
PPPoE, DHCP, DDNS, 3Gpp, UPnP.
System: Name, Location, Admin
ID & Password.
TCP/IP: Static IP Address, IP
Address, Subnet Mask, Default Gateway, Dynamic IP Address,
DHCP, PPPoE (User ID - User Password), Primary DNS Address,
Secondary DNS Address, Dynamic DNS, UPnP.
Users: 3 levels, Administrator
/ Viewer.
Date Time Settings: Y/M/D,
H/M/S, NTP Protocol, NTP Server Address: Adjust frequency Time
Zone.
Compression: 5 levels.
Frame Rate: Adjustable.
Resolution: QCIF, CIF, VGA,
Quad-VGA (Full scan mode 1280 x 960).
MPEG4 /
MJPEG 640 x 480 Real-Time 25 ips Live Monitoring.
MPEG4 15 ips
/ JPEG 12.5 ips 1280 x 960 Live Monitoring
Image: Rotation, Flip.
Digital: Pan / Tilt / Zoom.
Camera settings: Brightness,
Contrast, Sharpness, BLC, White Balance.
Upload configuration: FTP,
SMTP.
Dynamic DNS: Service, User
Name, Password, Domain Name.
Motion Detection: Sensitivity
adjustable, Masking configurable.
Alarm & Motion Detection
Actions: e-mail, upload to ftp, alarm out.
Triggered Actions: e-mail,
upload to ftp, alarm out, send notification to TCP/HTTP
server.
Open API: CGI commands for
Camera control, Media SDK for streaming.
Centa-View
Remote monitoring and recording software.
Optional
Maxi-Watch Megapixel multiple-brand (Axis™,
ACTi™,
Panasonic™,
Sony™,
D-link™,
Lumenera™,
Mobotix™,
PIXORD™,
Vivotek™,
JVC™)
software available.
Backup SD Card 128 MB to 4 GB SanDisk or Transcend Card.
Ethernet LAN / WAN Port 10/100 Base-T , RJ45 connector.
Web Browser Microsoft Internet Explorer 6.0 or above.
SDK: available for integration.
Audio 2 Way.
Wireless
WEP 64 / 128-bit, WPA, PSK IEEE
802.11b/g .
TX Output Power typically:
with Ant-W5dB Antenna, CCK 14 ~ 16 dBm (~ 30 mW), OFDM 10 ~ 13
dBm (10 ~ 20 mW).
RX Sensitivity typically:
with Ant-W5dB Antenna, 11 Mbps <-84 dBm, 54 Mbps <-70 dBm. |
Depends on Surroundings, Obstructions, other Transmitters (2.4 GHz
Cordless Phones, Wireless LAN, etc), Antenna Alignment,
Electromagnetic & Radio Frequency interference in the
vicinity. This device may be affected by and may affect other
devices that operate on or near the same frequency causing minor
to severe interference.
In ideal, clear, Line-of-Sight
conditions
with Ant-W5dB Antenna and communicating with a device of same or
higher Output & Sensitivity
up to ~ 100 metres.
Correctly matched and aligned 24 dBi antenna on one device up to ~
1000 metres.
Correctly matched and aligned 24 dBi antenna on both devices up to
~ 2000 metres.
Due to the nature of Radio Signals results are unpredictable (in
the same manner as Mobile / Cellular Telephones) signals reflected
from surrounding objects arriving at Receiver antenna may Add-to
or Subtract-from the direct signal from Transmitter. Directional
antennas may reduce affect of reflected signals.
Range and Signal to Noise Ratio
(SNR) may be improved by increasing gain of antenna on either/or
both devices. For maximum signal transfer both antennas should be
the same polarity, that is both oriented Vertically or
Horizontally.
 |
Cat Code:
Ant-Stub
$15
2.4 ~ 2.5 GHz
Whip Antenna, 0 ~ 3 dBi gain, ~ 50 ohms impedance. Antenna
for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Length: ~ 52
mm. Diameter: ~ 9 mm. Weight: ~ 6 grams.
SMA
male Connector. |
 |
Cat Code:
Ant-Whip
$20 Vertical Whip
Antenna Omni Directional 2.4 ~ 2.5 GHz, ~ 3 dBi gain, ~ 50
ohms impedance. Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc.
Length: ~ 107 mm straight,
~ 87 mm folded. Diameter: ~ 9 mm. Weight: ~ 11 grams.
SMA male Connector. |
 |
Cat Code:
Ant-W5dB
$20
Vertical Whip Antenna
non-directional 2.4 ~ 2.5 GHz, ~ 5 dBi
gain, ~ 50 ohms impedance.
Antenna for Wireless
LAN, WiFi Network, Wireless ADSL, Video Transmitters, etc.
Length: ~ 195 mm straight,
~ 170 mm folded. Diameter: ~ 13 mm @ Base ~ 6 mm @
Top. Weight: ~ 30 grams.
SMA male Connector. |
 |
Cat Code:
Ant-W12dB
$129 High Gain
Vertical Whip Antenna 2.4 ~ 2.5 GHz, ~ 12 dBi gain, ~ 50
ohms impedance. Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc.
Length: ~ 1210 mm, ~ 1425
mm with Base Mount Tube. Diameter: ~ 42 mm @ Base ~ 22 mm
main center section ~ 24 mm top cap. Weight: ~ 670 grams ~
930 grams with Mounting Tube & Clamp/Bracket.
Supplied with Base Mount
Tube and Clamps/Brackets for surface or Tubular Mast
mounting.
N female Connector.
<Adaptors & Extension Cables> |
 |
Cat Code: Ant-W15dB
$169
High Gain Vertical Whip
Antenna 2.4 ~ 2.5 GHz, ~ 15 dBi gain, ~ 50 ohm impedance.
Beamwidth: Horizontal 360º, Vertical 11º. VSWR (Voltage
Standing Wave Ratio) ~ 1.5. Maximum Power 50 Watts. Antenna
for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Length: ~
1640 mm, ~ 1935 mm with Base Mount Tube. Diameter: ~ 42 mm @
Base ~ 20 mm main center section ~ 22 mm top cap. Weight: ~
680 grams ~ 950 grams with Mounting Tube & Clamp/Bracket.
data sheet
N
female Connector. <Adaptors
& Extension Cables> |
 |
Cat
Code: Ant-Y8
$69
Discontinued
Cat Code: Ant-Y12
$89
Cat Code:
Ant-Y15 $79
Yagi
Antenna for Wireless LAN,
WiFi Network, Wireless ADSL, Video Transmitters, etc. 2.4 ~
2.5 GHz, ~ 15 dBi gain, ~ 50 ohms impedance. ~ 500 mm RG-58
Coax cable. Dimensions (excluding Clamps) ~ 650 x 95 x 35
mm, ~ 680 grams.
Supplied with
~ 140 x 70 mm Aluminium mounting plate, Clamps, etc.
Pictured in Vertical Polarity orientation * Mast not
included.
SMA
male Connector. <Adaptors &
Extension Cables> |
 |
Cat Code:
Ant-Y16C
$119
Yagi Antenna
for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc. 2.4 ~ 2.5 GHz, ~ 16 dBi gain, ~ 50 ohms
impedance. Beamwidth: E28, H28.
Dimensions
(excluding Clamps) ~ 650 mm, ~ 75 mm diameter, ~ 750 grams,
~ 500 mm RG-58 Coax cable. Supplied with Aluminium mounting
plate, Clamps, etc. Pictured in Vertical Polarity
orientation * Mast not included.
SMA
male Connector. <Adaptors &
Extension Cables> |
 |
Cat Code:
Ant-Y17.5C
$149
Yagi Antenna
2.4 ~ 2.5 GHz, ~ 17.5 dBi gain, ~ 50 ohms impedance.
Beamwidth: E23, H24. Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc.
Dimensions
(excluding Clamps) ~ 850 mm, ~ 75 mm diameter, ~ 800 grams,
~ 500 mm RG-58 Coax cable. Supplied with Aluminium mounting
plate, Clamps, etc. Pictured in Vertical Polarity
orientation * Mast not included.
SMA
male Connector. <Adaptors &
Extension Cables> |
 |
Cat Code:
Ant-F16
$99
Antenna for
Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc. COMPACT Flat 2.3 ~ 2.5 GHz, ~ 16 dBi
gain, ~ 50 ohm impedance.
Beamwidth: ~
27º (H) ~ 60º (V).
Supplied with
versatile selection of mounting hardware for Wall/Ceiling
mounting & two Tubular Mast Clamps.
Dimensions
(excludes Socket & Brackets) ~ 135 (W) ~ 455 (H) ~ 30 mm
(D), ~ 740 grams.
Pictured in
Vertical Polarity orientation
N female Connector.
<Adaptors & Extension Cables> |
 |
Cat Code:
Ant-F18
$149
COMPACT Flat 2.3 ~ 2.5
GHz, ~ 18 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 45º (H)
~ 75º (V). Antenna for Wireless LAN, WiFi Network, Wireless
ADSL, Video Transmitters, etc.
Supplied with versatile
selection of mounting hardware for Wall/Ceiling mounting &
two Tubular Mast Clamps.
Dimensions (excludes
Socket & Brackets) ~ 262 (W) ~ 262 (H) ~ 38 mm (D), ~ 950
grams.
Pictured in Vertical
Polarity orientation.
N female Connector.
<Adaptors & Extension Cables> |
 |
Cat Code: Ant-F20
$179
Compact Flat 2.4 ~ 2.5 GHz, ~
20 dBi gain, ~ 50 ohm impedance. Beamwidth: E30º H90º.
Front:Back > 25dB. VSWR ~ 1.6. Maximum Power 200 Watts.
Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Supplied with
50~80 mm Tubular Mast Clamp. Panel ~ 294 (W) ~ 330 (H) ~ 40
mm (D). Weight ~ 1.65 kg including mounting bracket. Tilt
+/- ~ 20º.
Pictured in
Vertical Polarity orientation.
data sheet
N female Connector.
<Adaptors & Extension Cables> |
 |
Cat Code:
Ant-P10
$99
COMPACT
Semi-Parabolic 2.3 ~ 2.5 GHz, ~ 10.5 dBi gain, ~ 50 ohm
impedance. Beamwidth: ~ 30º (H) ~ 60º (V). Antenna for
Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Supplied with
Tubular Mast Clamp. Dimensions (excludes Socket & Brackets)
~ 275 (W) ~ 90 (H) x ~ 58 mm (D), ~ 235 grams.
Pictured in
Vertical Polarity orientation.
SMA
female Connector. <Adaptors &
Extension Cables> |
 |
Cat Code:
Ant-P24 $199
Grid-Parabolic Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc. 2.4 ~ 2.5 GHz, ~ 24
dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 11º (H) ~ 7º (V).
Front:Back ~ 25dB. VSWR ~ 1.5. Maximum Power 100 Watts.
Supplied with
Clamps to suit 40 ~ 50 mm Tubular Mast, bracket for Vertical
or Horizontal mounting 60º Tilt in 10º increments. Aluminium
Grid (2 sections) ~ 1060 (W) ~ 600 (H) mm assembled. Weight
~ 2.8 kg including mounting bracket.
Pictured in
Horizontal Polarity orientation.
data sheet
N
female Connector. <Adaptors &
Extension Cables> |
Parabolic Yagi & Flat are
directional antennas. Whip antennas when used vertically
are for most practical purposes omni or non directional.
To maximise 'Range' minimise the
length of Coax Cable between Antenna and device.
  |
Cat Code: SMA-REVm
$10
Conventional SMA (external
thread, socket contact) to Reverse Polarity SMA
connector (internal thread, socket contact, Hex Nut)
Center Socket Contact
on both ends (no Pins), converts
Reverse Polarity SMA to conventional SMA (use with Netcomm
NB9W, etc) |
 |
Cat Code: SMA-REVf
$10
Conventional SMA connector (internal
thread, pin contact, Hex Nut) to Reverse Polarity SMA
connector (external thread, pin contact)
Central Pin Contact on
both ends. |
  |
Cat Code: SMAm-Nf
$10
SMA male (internal thread, pin contact, Hex Nut) to N
female. Suitable for P18G & P24G discontinued antennas. |
  |
Cat Code: SMAm-Nm
$10
SMA male (internal
thread, pin contact, Hex Nut) to N male. Suitable for
W12dB, W15dB, F16, F18, F20 & P24 antennas. |
 |
Cat Code: SMAm-m
$10
SMA male (internal
thread, pin contact, Hex Nut) to SMA male. Suitable for
P10 antenna. |
 |
Cat Code:
Cable-178/30 $19
30 cm RG-178
Coax cable with SMA male & female connectors. |
 |
Cat Code:
Cable-58/450 $39
~ 450 cm Coax Cable with SMA male & female connectors.
Attenuation 0.6 ~ 0.9 dB/metre @ 2 GHz., 0.8 ~
1.4 dB/metre @ 5.8 GHz
Cat Code:
Cable-23/450N $39
not pictured
~ 450 cm Coax Cable with SMA & N male
connectors. Attenuation ~ 0.75 dB/metre @ 2.4
GHz, ~ 0.8~1.4 dB/metre @ 5.8 GHz. Suitable
for W12dB, W15dB, F16, F18, F20 & P24 antennas. |
Antenna Gain... what does it mean ??? a simplified
explanation
Received
signal strength from an antenna with 3 dBi gain will be double
that from an antenna that has 0 dBi gain, received signal
strength from a 6 dBi will be double that from a 3 dBi and so
on... An increase in antenna gain of 3 dBi is approximately
equal to doubling the transmitter output, received signal
strength or range can be increased by raising antenna gain or
transmitter output. Range can be doubled by either increasing
antenna gain by 6 dBi or quadrupling the transmitter output.
Increasing
the gain of the receiver antenna is an alternative to
increasing transmitter output.
In very simple terms: increasing antenna gain
from 0 dBi to 3 dBi is equivalent to raising the output power
of a 10 mW transmitter to ~ 20 mW, (5 dBi to ~ 33 mW) (12 dBi
to ~ 160 mW) (15 dBi to ~ 320 mW) (18 dBi to ~ 640 mW)
|
|
|
Air