Discontinued
CCTV Quad Screen Processor: Suitable for all CCTV
Video Surveillance Cameras in this catalogue. Connect Four Video Cameras (or
other Video Sources) to Digital Quad Processor which performs an Analog to
Digital conversion on signals from each input then digitally constructs a Quad
Screen image that is output as a standard 75 ohm 1 v p-p Composite Video signal.
VCR Output is always Quad Screen. Monitor Output for live viewing may be Quad
Screen Image, Sequentially Switching Images or any Manually Selected input
channel. During replay image from any quadrant can be ZOOMED to Full Screen.
Alarm inputs, Recover input and Alarm output may be used to control a VCR for
'Event-Only' recording and/or for multiple Remote Monitoring Consoles that allow
selection of any Channel or Quad Screen Image during live viewing. Audible Video
Loss and Alarm buzzers alert user to intrusion and/or interference with Camera
video or power supply wiring. Log record of Alarm and Video Loss events. Alarm
period is programmable and may be used to control VCR recording. RS232 interface
for remote control using a PC.
Cat Code: QUAD-BW 506
REAL TIME QUAD
PROCESSOR * HIGH 1024 H-RESOLUTION * FULL SCREEN ZOOM
PLAYBACK * Time/Date/Title * 100 Event Alarm Log * Video Loss
Detection * Alarm I/O
$449
PP12/1.0A
Mains Plug Pack $14
for
a BETTER solution
Output to Monitor: Quad Screen, Full Screen or
Sequentially Switching.
Output to VCR: always Quad Screen.
Playback: Quad Screen or Full Screen ZOOM.
REAL TIME DIGITAL
QUAD PROCESSOR
HIGH RESOLUTION 1024 × 512 Pixels
BETTER THAN SUPER-VHS IMAGE QUALITY
FULL SCREEN ZOOM PLAYBACK Time / Date / Title
50 fields per second sampling, 8 bit A/D, 256 level Grey Scale.
Video Loss Detection with Audible Alarm and Time/Date Log entry.
Quad Screen, Manual Select or 4 Channel Auto Switching Mode 1 - 99 second Dwell.
100 Record Log of Alarm and Video Loss Events.
*** VCR Video Input with Gain Control and Front Panel
Selector for INSTANT REVIEW & ZOOM PLAYBACK ***
Security Lock. RS-232 Remote Control Interface.
On-Screen Set-Up Menu.
Four Standard CCIR Composite Video
Camera Inputs with Gain Controls.
Four Standard 75 ohm CCIR Composite Video
Looping Outputs.
Alternating Quad Screen VCR Video Output.
Sequential, Quad or Camera # 1,2,3,4 Video Monitor Output.
8 Normally Open Alarm Inputs, 1 Recover
Input, SPDT Alarm Output 1 - 999 sec adj.
12 Volts DC, ~ 9 Watts, 2.1 mm × 5.5 mm socket.
Input / Output: RS-232 & Alarm via 25 pin D-Sub socket, Video via BNC
sockets.
430 mm (W) 50 mm (H) 248 mm (D), 2.1 kg.
Use a low-cost domestic VCR
and our 'VCR Controller' for 'Event-Only' recording, 12 ~ 15 Hours Real-Time
click here for details.
Made in: Taiwan
Manufacturer's Experience: 18
+ YEARS in Electronics * 10 + YEARS with QUADS
Plug-In
DIY AV 20 metre Cable / Adaptor Set: 20 metre AV Cable with moulded
Plugs & Socket. Two RCA Plugs & DC Plug for Camera end. Two RCA Plugs
for input device, DC Socket for Plug-Pack. Two BNC-RCA Adaptors for Camera, VCR,
Quad, Switcher, Multiplexer, Monitor, Transmitter, etc.
Use your Browser "Back
Button" to return to previous page
