 Pinhole security camera |
|
 Security pinhole camera |
  |
|
|
|
Video System: PAL fully compatible
with Australian TV System.
Image Device: 537 (H) x 597 (V) 320
589 Pixel 1/3" LOW
BLEMISH Sharp CCD Image Sensor.
Lens: Pinhole Type 5.5 mm Focal Length, there
are no Accessory Lenses for this Camera,
tiny pinhole security camera lenses.
Scanning System: 2 : 1 Interlace, PAL
50 Hz vertical, 15 625 Hz horizontal.
Synchronisation: Internal.
Video Output: 1.14 V p-p Composite
Video 75 ohms, suit Australian TV, VCR, AV & Video inputs, BNC socket, ~ 30 cm
cable.
Horizontal Resolution: ~ 440 pixels
(this value is provided for comparative purposes only) Better than VHS * Near
Super-VHS resolution.
Minimum Illumination: ~ 0.5 lux @
F1.2, 5600º Kelvin (this value is provided for comparative purposes only).
Spectral Sensitivity: ~ 400 to ~ 700
nm.
Automatic Electronic Shutter (AES):
1/50 to 1/120 000 second, 20 milliseconds to 8.33 microseconds,
Pinhole CCTV.
Signal to Noise ratio: 52 dB minimum,
typically 60 dB, measured with AGC Off.
Automatic Gain Control (AGC): Yes.
Back Light Compensation (BLC):
Selectable via Rear Panel switch.
White Balance Range: ATW / AWC (3200º
~ 10 000º Kelvin), selectable via Rear Panel switch.
Digital Zoom: 2 X, selectable via Rear
Panel switch.
Mirror Image: Selectable via Rear
Panel switch.
Power Requirements: 12 Volts DC
Regulated, ~ 100 milliamps, 2.1 x 5.5 mm DC socket, center pin = (+),
~ 30 cm cable.
Dimensions: ~ 38 mm Wide, ~ 38 mm High
(excluding Bracket), ~ 23 mm Deep, ~ 100 grams.
Made in Taiwan in an ISO 9001 &
ISO-14001 certified factory.
Manufacturer's Experience: 23 + Years.
Need Sound ? click
here
Ancillary Products
Power-Up-Cable |
|||
